Description
OPEN BOX, Not USED.
| HPE 5130 48 G POE 4SFP HI with 1 interface slot switch(JH326A) | |
|---|---|
| I/O ports and slots | 48 RJ-45 autosensing 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE ); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; Ports 1 E support MACSec 4 SFP 10GbE ports 1 port expansion module slot Supports a maximum of 6 SFP ports or 2 1/10GBASE-T ports, with optional module |
| Additional ports and slots | 1 dual-personality (RJ-45 or mini USB) serial console port 1 RJ-45 out-of-band management port 1 USB 2.0 |
| Power supplies | 2 power supply slots 1 minimum power supply required (ordered separately) |
| Fan tray | Airflow direction is Front (port side) to Back (power cord side) |
| Physical characteristics Dimensions Weight |
17.32(w) x 18.11(d) x 1.72(h) in. (43.99 x 46 x 4.37 cm) (1U height) 27.56 lb (12.5 kg) shipping weight |
| Memory and processor | 2 GB SDRAM; Packet buffer size: 4 MB, 512 MB flash |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) |
| Performance 1000 Mb Latency 10 Gbps Latency Throughput Routing/Switching capacity Routing table size MAC address table size |
IPv6 Ready Certification < 5 µs < 3 µs Up to 190.5 Mpps 216 Gbps Up to 4K entries (IPv4), up to 2K entries (IPv6) 32768 entries |
| Environment Operating temperature Operating relative humidity Nonoperating/Storage temperature Nonoperating/Storage relative humidity Acoustic |
32°F to 113°F (0°C to 45°C) 10% to 90%, noncondensing -40°F to 158°F (-40°C to 70°C) 5% to 95%, noncondensing Low-speed fan: 57.6 dB, High-speed fan: 66.9 dB; ISO 7779 |
| Electrical characteristics Frequency Maximum heat dissipation Voltage Maximum power rating Idle power PoE power Notes |
50/60 Hz 2286 BTU/hr (2411.73 kJ/hr), ranges from 256 BTU/hr to 6142 BTU/hr, depending on power supply configuration 100 E40 VAC, rated (90 E64 VAC, max) (depending on power supply chosen) 670 W 75 W 1440 W PoE Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power range is from 450 W to 1440 W. PoE power is the power supplied by the internal power supply(ies). It is dependent on the type and quantity of power supplies. Device supports 1 or 2 internal modular power supplies. |
| Safety | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; RoHS Compliance; AS/NZS 60950-1; GB 4943; EAC (EurAsian Conformity Certification) |
| Emissions | EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.4-2009; EN 61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006 A1:2009 A2:2009; EN 61000-3-2:2006 A1:2009 A2:2009; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN 61000-4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010 Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A |
